Refrigeration controls Electronic Controller Controller type EKC
EKD EKA EKS
EKC 201 (for panel mounting) and EKC 301 (for DIN-rail mounting)
have been specially developed for control duties in refrigeration
plant so that operation, setting and programming are optimised and
simplified as much as possible.
All controllers are designed for room temperature control via pump
down or compressor start/stop and have been grouped into four main
applications dependent on the type of defrost and its control.
EKC 201 and 301 are used for
Fan motor control
With only two keys, all functions can be set and programmed.
The display shows the actual room temperature, but by activating
the keys the display changes
To the set or the actual temperature of the defrost sensor.
Fitting the EKC controller with a plug-in module for communication
gives access to all parameters of the controller. Thus, EKC 201/301
can be included in the ADAP-KOOL® Refrigeration control systems.
The digital input can be programmed to
- receive alarm signals from an external signal source (door alarm)
- start defrost from an external clock
- transmit random alarm signals to the bus system.
|084B7025||EKA151 THERMOMETER 230 V|
|084B7027||EKC102A H/C 230V 1 RELAY|
|084B7030||EKC202 L/T 230V 4 RELAYS|
|084B7031||EKC204 L/T 230V 4 RELAYS RTC|
|084B7620||EKC101 M/T 230V 1 RELAY|
|084N0035||SENSOR PT1000 DANFOSS|
|084N1163||EKS111 SENSOR 3.5M FOR EKC101|